Need help?Do you have a question about the SHERCO 300 SE-R 2017 and is the answer not in the manual?
General| Bore x Stroke | 72 mm x 72 mm |
|---|---|
| Transmission | 6-speed |
| Fuel System | Electronic Fuel Injection |
| Cooling System | Liquid cooled |
| Seat Height | 950 mm |
| Weight | 105 kg (dry) |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Ground Clearance | 330 mm |
| Front Suspension | 48 mm |
| Rear Suspension | Monoshock |
| Front Brake | Single disc, 260 mm |
| Rear Brake | Single disc, 220 mm |
| Displacement | 293.14 cc |
Detailed technical specifications for the motorcycle engine components.
Step-by-step guide for safely removing the engine from the motorcycle frame.
Detailed steps for correctly installing the engine back into the motorcycle frame.
Guide to removing the cylinder head, cylinder, and piston assembly.
Procedure for removing the clutch assembly from the engine.
Guide to removing the engine crankshaft from the crankcase.
Method for measuring crankshaft dimensions with a caliper.
Procedure to check the radial clearance of the connecting rod's big end.
Measuring the side clearance of the connecting rod.
Procedure to check the crankshaft's runout using dial indicators.
Inspection of the piston and piston rings for wear and damage.
Method for measuring the piston ring end gap.
Procedure for measuring cylinder bore wear using a micrometer.
Steps for disassembling the exhaust valve system components.
Procedure to check the functionality of the exhaust valve and booster systems.
Instructions for properly adjusting the tension of the exhaust valve cables.
Steps for installing the crankshaft into the crankcase.
To Next Page
