Need help?Do you have a question about the SHERCO SE 4.5i-f and is the answer not in the manual?
General| Transmission | 5-speed |
|---|---|
| Weight | 112 kg (247 lbs) |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Engine Type | 4-stroke |
| Fuel System | Electronic fuel injection |
| Engine Configuration | Single cylinder |
| Front Suspension | Hydraulic fork |
| Rear Suspension | Monoshock |
| Front Brake | Hydraulic disc |
| Rear Brake | Hydraulic disc |
| Bore x Stroke | 95 mm x 63.4 mm |
| Cooling System | Liquid |
| Rear Brake (detailed) | 220 mm disc |
| Front Brake (detailed) | 260 mm disc, 2-piston caliper |
Vehicle physical measurements like length, width, height, and wheelbase.
Details on engine design, cooling, displacement, bore, stroke, compression, etc.
Information on gearbox type, clutch, and gear ratios.
Frame type, steering angle, fork details, suspension, brakes, and tire sizes.
Specifications for headlights, drive lights, rear lights, and indicators.
Guidance on where to record vehicle and engine serial numbers.
Adjusting and operating the clutch lever on the handlebar.
Adjusting and operating the front brake lever on the handlebar.
Switches for lights, horn, and signals on the left handlebar.
Switches for start and ignition mapping on the right handlebar.
Explanation of the dashboard display and function buttons.
Positions of the main electrical switch for starting the engine.
Operation of the turn signal switch for left, right, and cancellation.
Engine mapping switch positions for different engine curves.
Diagram and explanation of the six gear positions.
Identification and operation of the rear brake pedal.
Using the side stand and its safety features.
Identification of dashboard display elements and indicator lights.
Explanation of various dashboard functions like speed, distance, and time.
How to display and understand the total distance traveled.
Explanation of the automatic trip function for tracking distance.
How to display and reset the average speed.
Description of the lap timer function for tracking time segments.
How to display and reset the maximum speed.
Explanation of the countdown trip function and how to set it.
Displaying the total operating hours of the motorcycle.
Real-time display of the engine speed in revolutions per minute.
How to adjust wheel circumference setting for accurate speed readings.
Recommended type of unleaded fuel and octane rating.
Instructions for opening and closing the fuel tank cap.
Identification of radiator components and bleed screws for coolant.
Procedure for checking the coolant level and filling the system.
Method for checking the engine oil level before changing.
Steps to add oil if the level is low.
How to check brake fluid levels in the reservoirs.
Procedure for refilling brake fluid reservoirs with DOT4.
Method to check the clutch hydraulic fluid level in the master cylinder.
Steps to refill the clutch hydraulic fluid reservoir.
How to check tire pressure and recommended values.
Instructions for inspecting tires for wear and damage.
How to adjust the handlebar position for comfortable riding.
Adjusting the clutch lever position for optimal reach and feel.
Changing the throttle control setting between quick and slow action.
Steps to adjust the brake pedal free travel and position.
Correct positioning of the brake pedal relative to the footrest.
Detailed procedure for adjusting drive chain tension.
Adjusting the fork's compression damping for ride comfort.
Adjusting the fork's rebound damping for suspension response.
Procedure for bleeding air from the front fork.
Adjusting the shock absorber's compression damping for impacts.
Adjusting the shock absorber's rebound damping for suspension return.
How to check for play in the rear shock absorber linkage.
Method for precisely setting rear shock absorber spring pre-load.
Step-by-step guide for starting the engine from cold.
Procedure for starting the engine when it is already warm.
How to shift gears, including finding neutral.
Instructions for parking the motorcycle safely.
Method for checking the engine oil level before changing.
Steps to add oil if the level is low.
Procedure for removing and replacing the engine oil filter.
Steps for refilling the engine with the correct amount of oil.
Procedure for draining the coolant from the system.
Steps for refilling the cooling system with new coolant.
Instructions for accessing the motorcycle's battery.
Guidance on checking voltage, charging, and replacing the battery.
How to remove the headlight plate to access bulbs.
Step-by-step guide for replacing bulbs.
Procedure for reattaching the headlight plate.
Steps for safely removing the front wheel.
Procedure for reinstalling the front wheel, including greasing.
Steps for safely removing the rear wheel.
Procedure for reinstalling the rear wheel, including greasing.
Detailed steps for safely removing the fuel tank.
Procedure for reinstalling the fuel tank and its connections.
Maintenance tasks for engine, oil, filter, spark plug.
Maintenance tasks specific to the fuel injection system.
Checks for cooling, exhaust, cables, and electrical systems.
Procedures for brake system maintenance, including fluid and pads.
Checks for shock absorber, forks, steering, and bolts.
Maintenance for wheels, spokes, tires, and chain.
Yearly maintenance for fork, absorber, and fluid changes.
Regular checks by rider before starting and after cleaning.
Specific torque values for various bolts and screws.
Recommended tire pressures for off-road and road use.
Vehicle fluid capacities for fuel tank and engine oil.
To Next Page
