How to fix a Sherwood NewCastle R-771 with no power?
If your Sherwood Receiver has no power, it might be due to a disconnected AC input cord or a faulty AC wall outlet. Ensure the AC cord is securely connected. Test the outlet with a lamp or another appliance to verify it's working.
Why is there no sound coming from my Sherwood NewCastle R-771?
If there is no sound from your Sherwood Receiver, check the speaker connections and ensure they are secure. Adjust the master volume to a suitable level. Also, verify that the MUTE button is not activated. Make sure the correct input source is selected and that all connections between components are properly made.
What to do if Sherwood Receiver remote control is not working?
If the remote control for your Sherwood Receiver isn't working, the batteries might be exhausted or not loaded correctly. Try replacing the batteries. Also, ensure that nothing is obstructing the remote sensor on the receiver.
Why can't my Sherwood NewCastle R-771 receive any stations?
If your Sherwood Receiver isn't receiving stations, ensure an antenna is connected properly. Tune in to the desired station frequency. If the issue persists, try repositioning the antenna for better reception.
How to improve poor FM reception on my Sherwood NewCastle R-771 Receiver?
If you're experiencing poor FM reception with your Sherwood Receiver, ensure an antenna is connected. Try changing the antenna's position to improve signal quality.
Why no sound from surround speakers on my Sherwood NewCastle R-771?
If there's no sound from the surround speakers on your Sherwood Receiver, confirm that a surround mode is selected instead of stereo mode. Adjust both the master volume and surround level. Ensure you are using a stereo or surround source, and check that the surround speaker setting is not set to "NONE".
What to do if there is no sound from the center speaker on Sherwood Receiver?
If you are not getting any sound from the center speaker of your Sherwood Receiver, check that you have selected the desired surround mode. Ensure that the center speaker setting is not set to "NONE". Adjust the master volume and center level to appropriate levels.
Why can't my Sherwood NewCastle R-771 receive preset stations?
If your Sherwood Receiver isn't receiving preset stations, it could be due to incorrect station frequencies being memorized or the memorized stations being cleared. Try memorizing the correct station frequencies again.
Why is there no sound from the surround back speakers on my Sherwood NewCastle R-771?
If there is no sound from the surround back speakers on your Sherwood Receiver, it may be due to the input signal format or the current surround mode not supporting 7.1 or 6.1 surround. Also, check if the power amplifier for the surround back/room 2 channels is assigned to ROOM 2. Adjust the master volume and surround back level. Lastly, ensure the surround back speaker setting is not set to "NONE".
How to stop hissing noise during FM reception on my Sherwood NewCastle R-771 Receiver?
If you're experiencing continuous hissing noise during FM reception on your Sherwood Receiver, especially with stereo broadcasts, it could be due to weak signals. Try changing the position of the antenna or installing an outdoor FM antenna.
Covers essential safety guidelines for product operation, installation, and maintenance.
Instructions for connecting FM and AM antennas to the receiver for optimal reception.
Guide for connecting various video sources like DVD players, VCRs, and monitors.
Details on connecting audio sources like CD players, tape decks, and MD recorders.
Guidance on connecting digital audio sources via optical or coaxial connections.
Proper procedures for connecting speakers, including polarity and terminal assignments.
Identification and function of all buttons and controls on the receiver's front panel.
Overview of the universal remote, Digi Link compatibility, and device selection.
Guide to entering setup codes for controlling other components with the remote.
Steps for programming, operating, and removing macro functions for automated sequences.
Steps for turning on the receiver and selecting an input source for audio playback.
Explanation of DTS Digital Surround, DTS-ES Extended Surround, and DTS Neo:6 modes.
Details on Dolby Digital and Dolby Digital EX formats for enhanced audio.
Information on Dolby Pro Logic IIx, II, and standard Pro Logic surround modes.
Guide to selecting auto or manual surround modes based on signal format.
Procedures for adjusting speaker channel levels using test tones and memorization.
To Next Page
General