To Next PageTo Next PageHow to troubleshoot no power on Sherwood RD-6506 Receiver?
If your Sherwood Receiver has no power, there could be a few reasons. First, ensure the AC input cord is securely connected. If it is, check the AC wall outlet by testing it with a lamp or another appliance to make sure the outlet is working.
Why is there no sound coming from my Sherwood RD-6506?
If you're not getting any sound from your Sherwood Receiver, several things could be the cause. First, check the speaker wire connections to ensure they are secure. Then, make sure the master volume isn't set too low and that the MUTE button isn't activated. Also, verify that you've selected the correct input source and that all connections between components are correct. Finally, ensure the HDMI AUDIO OUT is set to AMP and that all audio settings are configured correctly.
What to do if Sherwood RD-6506 remote control is not working?
If the remote control for your Sherwood Receiver isn't working, first replace the batteries. If that doesn't solve the problem, make sure there's nothing obstructing the remote sensor on the receiver.
Why is my Sherwood Receiver showing no picture?
If you're not getting a picture on your Sherwood Receiver, ensure that the video connections between the unit and your monitor TV are correctly made. Also, check that you've selected the correct input source on your monitor TV.
How to improve poor FM reception on Sherwood Receiver?
If you're experiencing poor FM reception with your Sherwood Receiver, start by ensuring an antenna is connected. If one is connected, try repositioning it for better reception. If the signals are weak, consider installing an outdoor FM antenna.
Why no sound from surround speakers on my Sherwood RD-6506 Receiver?
If there's no sound from the surround speakers on your Sherwood Receiver, first check that surround mode is enabled and not set to stereo. Then, adjust both the master volume and surround level. Ensure you're using a stereo or surround source, and verify that the surround speaker setting is not set to "NO".
How to fix Sherwood RD-6506 when stations cannot be received?
If your Sherwood Receiver isn't picking up stations, make sure an antenna is connected. Then, tune in the desired station frequency. If you still have trouble, try moving the antenna and retuning.
Why is there no picture with HDMI connection on Sherwood Receiver?
If you're not getting a picture with an HDMI connection on your Sherwood Receiver, first ensure that the HDMI connection between the unit and your monitor TV is correctly made. Also, confirm that your monitor TV or other equipment supports HDCP, as the unit will not output a video signal without it.
Why is there no sound from the center speaker on Sherwood Receiver?
If you're not hearing sound from the center speaker of your Sherwood Receiver, make sure a surround mode is selected instead of stereo. Check that the center speaker setting is not set to "NO". Also, adjust the master volume and center level to ensure they aren't too low.
What to do if preset stations cannot be received on Sherwood RD-6506 Receiver?
If your Sherwood Receiver isn't receiving preset stations, the memorized station frequency may be incorrect. Memorize the correct station frequency. If the memorized stations are cleared, memorize the stations again.
General| Frequency range | 20000 - 50000 Hz |
|---|---|
| Input sensitivity | 250 mV |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Power output per channel (1KHz@6 Ohm) | 100 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 3 |
| Composite video in | 2 |
| Digital audio optical in | 1 |
| Speakers connectivity type | - |
| Ethernet LAN | No |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Radio Data System (RDS) | Yes |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Pro Logic II, DTS, DTS 96/24 |
| Apple docking compatibility | Not supported |
| Power consumption (typical) | 200 W |
Weight and Dimensions| Depth | 359 mm |
|---|---|
| Width | 435 mm |
| Height | 143 mm |
| Weight | 8600 g |
Essential instructions to read before operating the Sherwood RD-6506 receiver.
Covers electrical safety warnings, installation precautions, and proper disposal of electronics.
Guide to connecting FM indoor/outdoor and AM antennas to the receiver.
Instructions for connecting analog and digital video sources like VCRs, DVD players, and BD players.
Details on connecting audio sources like CD players, BD players, and video game consoles.
How to connect optical and coaxial digital audio sources to the receiver.
Instructions for correctly connecting front, surround, and center speakers to the receiver.
Recommendations for ideal placement of speakers for optimal surround sound effects.
Identification and function of buttons and indicators on the receiver's front panel.
Overview of the remote control unit, its buttons, and functions.
Guide to remote control operating range, battery installation, and replacement.
How to select input sources and turn on speakers for playback.
Explanation of available surround sound processing modes like DTS and Dolby Pro Logic.
Guide on selecting and using surround sound modes for optimal listening experience.
Instructions for tuning into FM and AM radio stations using auto and manual methods.
Procedures for recording audio to tape and dubbing video from one component to another.
Steps to verify proper operation of HDMI control functions between connected devices.
Introduction to the system setup menu and navigation.
Adjusting system parameters like subwoofer mode, tone, and auto power save.
Configuring audio input assignments and auto surround mode.
Adjusting speaker size, crossover frequency, and distance settings.
Adjusting individual speaker channel levels and memorizing settings.
Adjusting Dolby Pro Logic II Music parameters and Dynamic Range Compression.
Configuring HDMI audio output, CEC control, and power control.
Table of common problems, their possible causes, and recommended solutions.
Technical details and performance characteristics of the Sherwood RD-6506 receiver.
