Need help?Do you have a question about the Sherwood XA-1141 and is the answer not in the manual?
Amplifier Specifications| average power output per channel into 4 ohms | 20Hz-20KHz, 0.5% THD |
|---|---|
| frequency response | 16Hz~37KHz |
| signal to noise ratio | 90dB |
| input sensitivity into 10k ohms load impedance | 1V |
| speaker input sensitivity high | 1V |
| speaker input sensitivity low | 5V |
| damping factor | 90 |
Power| operating voltage | 14.4V (10.8V~15.6V allowable range) |
|---|
Speaker and Impedance| speaker impedance | Minimum 4 ohms |
|---|
Weight and Dimensions| dimension width | 165mm |
|---|---|
| dimension height | 37mm |
| dimension depth | 230mm |
| net weight | 1.4Kg |
Details on connecting amplifier speaker outputs to car speakers.
Connecting receiver outputs to amplifier speaker inputs.
Instructions for connecting the amplifier's power supply.
Explains Line Input and Adjustable Input Sensitivity controls.
Details Speaker Connections, Power, Ground, and Remote connections.
Details on output power, frequency response, and S/N ratio.
Specifies high and low input sensitivity ranges for speakers.
Covers operating voltage, impedance, fuses, dimensions, and weight.
To Next Page
