Shibaura SG280E - Page 31

30
3030
30
DRIVING AND WORK
6. Loading onto and Unloading from Truck
● When loading the vehicle onto or
unloading from a truck, stop the truck
engine, apply the hand brake to prevent
the truck from moving and apply a chock
to the vehicles wheel. Park on a flat place
where the traffic is safe.
● Select loading ramps of enough width,
length and strength and not slipping easily.
Hitch a hook positively to the deck of the
truck to prevent the loading ramps from
getting out of place.
● When loading the vehicle onto a truck,
drive the vehicle in reverse.
● Remove mud, etc. from the tire to prevent
the vehicle from side slipping on the
loading ramps.
● Never change the course on the loading
ramps. If change of course is required, get
down from the loading ramps and restart.
①
①①
① Loading and Unloading with
Ladders or
Lamps
< Specifications for loading ramps>
● Length: ····
More than 3.5 times the height
of the loading space of the truck
● Width: ······ More than 40 cm
● Strength: ··
Should withstand the weight of
2000 kg.
● Surface should have a non-slip surface.
●
●●
● The loading ramps
should not be laterally
uneven in height. Install the walkway
positively to the center of the loading space
of the truck to ensure even right and left
length.
<Loading>
(1) Raise the implement to
a height not to allow
the implement to touch the loading ramps.
(2) Position the implement straight to the
loading
ramps and load it slowly.
(3) Operate the steering wheel carefully so
not to
allow the wheels from coming off the ramps.
(4) After completion of loading, lower the
cutter
deck until it comes into contact with the
bed
of the vehicle
, turn OFF the main switch and
fix the vehicle firmly with ropes.
<Unloading>
(1)
Unload the vehicle in the reverse order to
loading.
②
②②
② Transportation method
● Fix the vehicle firmly with strong ropes.
Lower the cutter deck until it comes into
contact with the bed of the vehicle. If not,
when the truck brakes suddenly, the mower
may fall off the vehicle leading to an injury
accident.
● When carrying the vehicle on the truck, fix
the bonnet with a locking catch and lock pin
to prevent it from opening. If not, the cover
may be opened by wind, and cause an
unexpected accident.
Warning
Warning
Caution