Shibaura SG280E - Cooling System and Battery Servicing

41
4141
41
INSPECTION AND MAINTENANCE
③
③③
③ Fuel Filter
Cleaning and Replacement
(1) Turn the fuel tap to the “C”
(closed)
position.
(2)
Remove the filter cup and remove the
water and dust in the filter cup.
(3)
After completion of filter cleaning, install it
to the original position and turn the fuel tap
to the “O” (opened) position.
The fuel feed pump of this machin
e is driven
from the cam shaft. After it is operated for
cleaning or replacement, remove the cap and
discharge the air in the filter cup.
(4)
Replace the fuel filter every 200 hours of
operation.