Shibaura SG280E - SAFETY AND INSTRUCTION DECALS; Understanding Machine Safety Decals

7
77
7
SAFETY RULES
- After the completion of loading, lower
the
implement
. Then, stop the tractor engine and
set the parking brake (for tractor).
- Fix the tractor vehicle with a strong rope.
2) Unloading on the truck
-
Please do the unloading work under the
opposite procedure of loading
3) Warning
- Set the parking brake for truck.
-
Remove the mud from the tractor tires in order
to prevent vehicle from slippi
ng sideways on
the
ramps. There is a possible risk of fall of
vehicle due to accidental movement of ramps
during loading work.
-
Put the hook of the ramps on the truck floor
firmly. There is a possible risk of fall of the
vehicle due to accidental movement of the
ramps during loading work.
-
Keep the even height between right and left
ramps. There is a possible risk of fall of the
vehicle due to accidental movement of the
ramps during loading work.
- Do not steer sharply on the ramps.
There is a risk of fall of the vehic
le due to
accidental movement of the ramps during
loading work.
- Pay attention to loading & un-
loading in order
not to loose the vehicle's balance when moving
the vehicle on the gap (seam) between the
ramps and truck floor.
Keep those works at slo
w speed. There is a
possible risk of fall of the vehicle.
-
Fix the vehicle tire & bumper and drawbar hitch
with a strong rope firmly. There is a possible
risk of accidental movement of cargo during
transportation.
-
In case of using sunshades cover etc, please
fix it with the ropes etc firmly. There is a
possible risk of deformation or
part detach or
fall on the vehicle part, which tends to be
affected by wind pressure.
-
Do the loading work slowly by moving the
vehicle forward. If loading work is done by
moving the vehicle backward, the vehicle's
rear tire tends to float and as a resul
t, there is
a possible risk of fall of vehicle However, in
case that the rear visibility is not good due to
the rear installation implement, please do the
loading by moving the vehicle backward,
considering the possible any difficulties and
fall of vehicle on the unloading.
- Assur
e that the height of the cargo will not be
problem at the height restriction area to avoid
danger to other traffic.
ENVIRONMENTALLY RESPONSIBLE
ALWAYS BE ENVIRONMENTALLY
RESPONSIBLE
- Follow the guidelines of the gove
rnment
agency for the proper disposal of hazardous
materials such as engine oil, diesel fuel,
engine coolant and, machine fluid, grease.
-
NEVER dispose of hazardous materials
irresponsibly by dumping them into a sewer,
on the ground, or into ground water
or
waterways.
-
Failure to follow these procedures may
seriously harm the environment.
-
Comply with legal regulations and guidelines
for disposal of empty containers for fuel,
cooling water (coolant),oil, grease; fuel/oil
filters; batteries; machine
itself; machine
accessories; and packaging materials.