SECTION 4 – SXM54, SXM60 MOWER DECK
4-13
15. Release the locking collar and push the
driveshaft onto the PTO shaft, securing the
driveshaft to the PTO shaft.
16. IMPORTANT: Be sure locking collar is
locked onto PTO shaft prior to operating
the mower deck.
17. Remove and re-install the four gauge wheels
① to the operating position.
NOTE: See Mower Deck Adjustment section for
proper position and adjustment of gauge wheels
prior to operation.
DISMOUNTING THE MOWER DECK FROM
THE TRACTOR
1. Remove and re-install the four gauge wheels
① in the sideways position.
2. Secure the wheel spindles with the clevis
pins ② and clips ③.
To Next Page
Loading...
