Need help?Do you have a question about the Shimadzu AUW220D and is the answer not in the manual?
General| Maximum Capacity | 220 g |
|---|---|
| Readability | 0.1 mg |
| Display | LCD |
| Power Supply | AC adapter |
| Linearity | ±0.2 mg |
| Response Time | Approx. 3 seconds |
| Operating Temperature | 5 °C to 40 °C |
| Calibration | Internal/External |
| Repeatability | 0.1 mg |
| Pan Size | 90mm diameter |
Overview of the high-performance analytical balance and its advanced features.
Information on warranty coverage and customer support services.
Explanation of symbols and notations used throughout the instruction manual.
Identifies and describes the key physical parts of the analytical balance.
Details the function of each key on the balance's control panel.
Explains the various symbols and indicators shown on the balance display.
Detailed technical specifications for AUW-D, AUW, AUX, and AUY series balances.
Guidelines for choosing an optimal location, avoiding environmental factors.
Steps for physical setup, connecting power, and initial power-up.
Instructions for performing initial span calibration for accurate measurements.
Step-by-step guide for standard weighing operations.
How to switch measurement units and weighing ranges.
Tips for achieving stable measurements in the sensitive semi-micro range.
Explanation of the direct data transfer function to computers.
Configuration and usage steps for PC connection without software.
Solutions for common issues encountered with the WindowsDirect function.
Explanation of how to navigate and use the balance's menu structure.
Detailed steps for accessing and changing menu settings.
Features like settings check, default reset, and menu lock.
Procedures for setting the internal date and time on the balance.
How to enable or disable the graphical load indicator.
Adjusting the display's decimal place precision.
Instructions for switching the display backlight on or off.
Explanation of why calibration is essential for accurate measurements.
Detailed procedures for performing various calibration types.
Configuring calibration methods for GLP/GMP/ISO compliance.
How settings adapt the balance to installation environment or measurement needs.
Configuring modes like Standard, Anti-convection, High-stability, and Pouring.
Configuring stability detection bands and zero tracking.
Adjusting when the stability indicator light activates.
Registering and selecting various units for display and measurement.
How to set up and use the percentage conversion feature.
Using the balance for counting discrete items.
Procedures for measuring specific gravity of solids and density of liquids.
Using Auto Print, Interval Timer, Add-on, and Formulation modes.
Steps for connecting and using the EP-80 printer.
Connecting the balance to a PC using RS-232C interface.
Setting up baud rate, parity, data format, and handshake.
Choosing the decimal point format for data output.
Cleaning instructions and basic upkeep for the balance.
Proper methods for moving or transporting the balance.
List of error codes and their corresponding countermeasures.
Troubleshooting guide for common problems and symptoms.
Visual guide to the balance's menu structure and options.
List of standard and optional accessories and parts.
Technical details for the RS-232C interface connector.
Reference table for various mass unit conversions.
Guidelines for verifying the balance's operational performance.
Dimensional specifications for the below-weigh hook.
Alphabetical index for quick reference to topics in the manual.
To Next Page
