Need help?Do you have a question about the Shimadzu AUW320 and is the answer not in the manual?
General| Capacity | 320 g |
|---|---|
| Readability | 0.1 mg |
| Display | LCD |
| Repeatability | 0.1 mg |
| Linearity | ±0.2 mg |
| Power Supply | AC adapter |
| Calibration | Automatic Calibration |
Details the functions of each key on the balance and their operations during measurement and menu selection.
Provides guidelines and cautions for selecting an appropriate location for balance installation.
Step-by-step instructions for physically installing the balance and its components.
Details the process of connecting the power and the initial startup sequence of the balance.
Explains the importance and process of performing initial span calibration after installation.
Describes the fundamental steps for performing a standard weighing operation.
Provides instructions for achieving stable measurements in the semi-micro range.
Guides through the process of configuring the balance and computer for WindowsDirect.
Explains how to properly connect the necessary cable for data communication.
Details the computer-side configuration required for WindowsDirect function.
Describes how to initiate and verify the WindowsDirect data transfer.
Offers solutions for common issues encountered with the WindowsDirect function.
Explains the necessity and purpose of calibration for accurate measurements.
Step-by-step instructions for performing various calibration procedures.
Covers connecting the balance to a PC via RS-232C for control and data transfer.
Guides on configuring communication parameters for peripherals.
Lists common error codes and their corresponding countermeasures.
Provides solutions for common operational symptoms and issues.
Outlines procedures for checking the balance's performance and accuracy.
To Next Page
