Need help?Do you have a question about the Shimadzu AUW120 and is the answer not in the manual?
General| Maximum Capacity | 120 g |
|---|---|
| Readability | 0.1 mg |
| Power Supply | AC adapter |
| Repeatability (Standard Deviation) | 0.1 mg |
| Linearity | ±0.2 mg |
| Interface | RS-232C |
| Operating Temperature | 5°C to 40°C |
| Display | LCD |
| Response Time | Approximately 3 seconds |
Explains the function and operation of each key on the balance control panel.
Details the various symbols and indicators shown on the balance display.
Provides guidelines for selecting a suitable location for balance installation.
Outlines the procedure for checking the balance upon unpacking for damage or missing parts.
Details the step-by-step process for physically setting up the balance.
Explains how to connect the power adapter and turn on the balance for the first time.
Describes the essential procedure of span calibration after installation for accuracy.
Provides the fundamental steps for performing a weighing operation.
Introduces the WindowsDirect function for direct data transfer to computers.
Provides solutions for common issues encountered with WindowsDirect communication.
Explains the necessity and purpose of calibration for accurate measurements.
Provides step-by-step instructions for performing various calibration procedures.
Covers how to select and configure different calibration methods.
Details settings for calibration reports, balance ID, and date printout.
Details standard and user settings for communication parameters.
Lists common error codes and their countermeasures.
Addresses common symptoms and their possible causes and solutions.
To Next Page
