-76-
P.TARE= Sets Pretare value.
ZRNG= Sets Zero Range value.
UW= Sets unit weight.
USER= Sets user unit conversion coefficient.
VOL= Sets volume of reference weight.
SDENSE= Sets surrounding liquid density.
I.TIME= Sets interval timer value.
DATE= Sets the date.
TIME= Sets the time.
TARGET= Sets the target value.
LIMIT= Sets the limit value.
G.LO= Sets the lower limit value of Group Display mode.
G.UP= Sets the upper limit value of Group Display mode.
L.LO= Sets the lower limit value of Level Display mode.
L.UP= Sets the upper limit value of Level Display mode.
PCS= Sets the arbitrary loading piece.
#= Corresponds to numeral keys of AKB-301 Application
Keyboard.
ID= Sets ID.
PASSSET= Sets PCAL password.
PASS= Inputs PCAL password.
(vii) Commands of special functions
CAL Enters Span Calibration mode.
C18 Enters Span Calibration mode.
LOCK Sets menu lock.
RELEASE Releases menu lock.
TIME Readout of date and time
ADJCLK Adjusts ± 30 seconds.
RSTMN Menu reset
MENU= Sets arbitrary menu.
{ Echo back
} Echo back
[] Sets to Multi-Connection mode. (represents a lower-case
alphabet character.)
Note: For Multi-Connection mode, refer to Section 3.3.5 "Multi-Connection Mode"."
(5) Compatible commands with Mettler® Electronic Balances
S One time output at a stable state
SI Immediate one time output
SIR Continuous output
SR Continuous output at a stable state
T Taring after stabilized
TI Immediate taring
To Next Page
