Shimadzu Hyper Vision HPV-X2 - Safety Instructions; Installation Site

iii
High-Speed Video Camera
HPV-X2
Warranty
Safety Instructions
To ensure safe product operation, read these important safety instructions carefully before
use and follow all WARNING and CAUTION instructions given in this section.
 Installation Site
Warning
● Avoid humidity and dust
Do not place the product in an environment with high humidity or dust. This may result in
fire or electric shock.
Caution
● Avoid unstable locations
Do not place the product on a shaky table or inclined surface. It may fall or tip, resulting in
injury.
● Do not place heavy objects on the product
Do not place anything 2 kg, or heaver, on the product. This may cause the product to
overbalance and tip, resulting in injury.
● Use the product under the following site conditions.
 Locations with room temperature between 5 and 40℃
 Locations not exposed to direct sunlight
 Locations with low vibration levels
 Locations with low dust and humidity levels
 Locations without corrosive gases
 Locations with 75 % or lower relative humidity
 Indoor locations only
 Installation category : II
 Pollution degree : 2
 Operating altitude: Max. 2,000 m