High-Speed Video Camera
HPV-X2
Operation
● Disconnect all cables before moving the product
Before moving the product, turn off the power switch and pull the plug from the power
outlet, and disconnect all external cables. Failure to do so may damage cables, resulting in
fire or electric shock.
● Do not pull on the cable to pull out the power plug
Do not pull on the cable to pull out the power plug. This can damage the power cable,
resulting in fire or electric shock. To pull out the power plug, hold the plug itself.
● Pull out the power plug if an emergency such as the following occurs
When the product falls and is damaged
When the product emits smoke
When the product makes a strange noise or emits abnormal odorsc
When the power cable is damaged
Continuing to use the product in this condition may result in fire or electric shock.
Immediately contact your Shimadzu representative.
● Avoid operation in strong electromagnetic fields
Do not use the product in locations subject to strong electromagnetic fields. This may
result in incorrect or abnormal operation.
● Do not put vessels containing liquid or small metal objects on the product
Do not put vessels containing liquid or small metal objects on the product. These may spill
or fall into the product, causing fire or electric shock.
● Avoid getting this product wet
Pay special care when using this product in locations subject to rain and snow, near the
coast or watery locations. Failure to do so may result in fire or electric shock.
● Do not put foreign objects or water inside the product
If foreign objects or water enter the product, first turn off the power switch and pull out the
plug from the power outlet.
Continuing to use the product in this condition may result in fire or electric shock. Next,
contact your Shimadzu representative.
● Do not touch the plug or connectors if thunder can be heard
Do not touch the power plug or other connectors if thunder can be heard. This may result
in electric shock.
To Next Page
Loading...