To Next PageTo Next Page
Need help?Do you have a question about the Shimadzu TX2202L and is the answer not in the manual?
General| Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Repeatability (Standard deviation) | 0.01 g |
| Linearity | ±0.02 g |
| Operating Temperature Range | 5 °C to 40 °C |
| Interface | RS-232C |
| Power Supply | AC adapter |
| Stabilization Time | 2 seconds |
| Power Consumption | Approx. 6W |
Details the main body and rear components of the TW/TX and TXB series balances.
Covers selecting the installation site and unpacking/inspecting the balance components.
Step-by-step guide for performing span calibration for TW and TX/TXB series balances.
Explains how to enter the weighing mode and perform basic weighing operations.
Details span calibration and calibration checks using internal or external weights.
Introduces Piece Counting, Percentage Weighing, and Formulation modes.
Explains connecting to PCs and printers, data formats, and communication settings.
Lists common symptoms, probable causes, and countermeasures for balance issues.
Explains error messages displayed on the balance and their corresponding causes/solutions.
