To Next PageTo Next Page
Need help?Do you have a question about the Shimadzu TX323L and is the answer not in the manual?
General| Capacity | 320 g |
|---|---|
| Readability | 0.001 g |
| Calibration | External |
| Display | LCD |
| Power Supply | AC adapter |
| Repeatability | 0.001 g |
| Linearity | ±0.002 g |
| Interface | RS-232C |
| Units of Measurement | g, mg, oz, ct |
Explains how to enter the weighing mode and perform basic weighing steps.
Details types of calibration (span, check) and preparation steps before performing them.
Guides on adjusting balance sensitivity using internal or external weights for accurate calibration.
Explains how to check for sensitivity drift using internal or external weights.
Provides steps for recalibrating the internal weight of TW series balances.
Guides on setting unit weight and counting the number of pieces present.
Explains converting sample weight to a percentage of a reference weight.
Sets a target value and tolerance range, indicating excess/deficit with symbols.
Sets upper/lower limits for pass range, indicating pass/fail or out-of-range.
Enables numerical value transfer to PC cursor position without software.
Provides a symptom-based guide to common issues and their countermeasures.
Explains probable causes and countermeasures for various error and status messages.
