Shimano Steps BT-E8036 - Page 14

14
List of tools to be used
Component Location used/screw
type
Tool
Battery mount
(BM-E8020)
Lower case
Key unit
5 mm hexagon wrench
Key unit
(adjust installation
location)
TL-BME03
Upper case / key unit
cover
Cross head screwdriver [#2]
Key cylinder
2 mm hexagon wrench
Battery mount
(BM-E8030 / BM-E8031)
Upper bracket
4 mm hexagon wrench
Spring unit
1.5 mm hexagon wrench
Latch base / key cylinder
/ lower bracket /
connector unit
3 mm hexagon wrench
TL-BME04 / TL-BME05
Unlock pin unit
2.5 mm hexagon wrench
Satellite charging port
(EW-CP100)
Mounting screw
2 mm hexagon wrench
Satellite system ON/OFF
switch
(EW-SW100 / EW-
SW300)
Mounting screw
2 mm hexagon wrench
Maintenance (BM-
E8030 / BM-E8031)
Double latch plate
2 mm hexagon wrench
Spring unit
1.5 mm hexagon wrench
Maintenance (charging
of the satellite system
ON/OFF switch)
Drive unit cover
Cross head screwdriver [#2]