40
Installation/removal
Installing the battery mount
(2) Remove TL-BME03.
(3) Install the retention rubber.
(2)
Retention rubber(3)
Key unit mounting screw
(1)
10 N·m
7. Install the key unit cover.
(1) Temporarily install the key unit cover.
(2) Try attaching and removing the battery, and check the following:
– The battery can be smoothly attached and removed
– There is no rattling in the key unit cover or battery that could result in abnormal
noise when riding
(3) Secure the key unit cover.
To Next Page
Loading...
