Name: Shimano Steps SC-E5003
Brand: Shimano Steps
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Installation/removal

Installing the cycle computer/junction [A]

TECH TIPS

• To remove the EW-EN100, reverse the following procedure.

NOTICE

• As shown in the ﬁgure, install junction [A] so that it does not reach the side of the

frame. Otherwise, it could be damaged if the bicycle tips over and it is pinched

between the frame and curb.

1. Determine the junction [A] installation location, then set the adapter.

(1) Open up the adapter and set it to the brake hose / brake outer casing.

Questions and Answers:

Need help?

Do you have a question about the Shimano Steps SC-E5003 and is the answer not in the manual?

Shimano Steps SC-E5003 Specifications

General