53
Maintenance
Gear shifting adjustment with the electronic gear shifting unit [Adjust]
4. Proceed to adjust according to the symptom, as shown below.
Change the adjustment value according to the symptom, and repeat the following until
the abnormal noise or unusual feel is resolved.
If the symptom is improved, or there is no noticeable change
(1) Change the adjustment value another step in the same direction (positive or
negative) as the change that was just made.
(2) Return to the basic screen, and once again shift gears to check the symptom.
computer example
(SC-E7000)
Bracket installation type cycle computer
example (SC-E6100)
Switch unit integrated type cycle computer
example (SC-E5000)
If the symptom is worse
(1) Change the adjustment value two steps in the opposite direction (positive or
negative) as the change that was just made.
To Next Page
Loading...
Need help?
General
