Need help?Do you have a question about the Shimano MTB SHADOW RD-M4000 and is the answer not in the manual?
General| Model | RD-M4000 |
|---|---|
| Mount Type | Direct Mount |
| Actuation Ratio | Shimano 9-speed |
| Max Sprocket Size | 36T |
| Min Sprocket Size | 11T |
| Total Capacity | 45T |
| Rear Speeds | 9 |
| Top-normal spring type | Yes |
| Pulley Teeth | 11T |
| Weight | 290g |
| Color | Black |
| Shadow Design | Yes |
| Clutch Mechanism | Yes |
| Cage Length | Long |
| Series | Deore |
| RD Cage Size | Long |
| Material | Aluminum |
| Compatible chain | HG 9-speed |
Mounting rear derailleurs on direct-mount compatible frames.
Procedure for replacing bracket axle and spacer for direct mount type.
Compatibility and removal of the mode converter on RD-M820.
Procedure for adjusting the rear derailleur using the end adjust bolt.
Procedure for adjusting the shifting system (SIS) for SHADOW RD+.
Procedure for replacing the bump stopper/holder on the RD-M820.
Procedure for replacing the plate and plate tension spring on RD-M986.
Procedure for replacing plate/tension spring for models other than RD-M986.
Procedure for replacing the B tension spring on RD-M4000/RD-M3000.
Procedure for adjusting the friction amount on the RD-M986 derailleur.
Procedure for adjusting the friction amount on models other than RD-M986.
Procedure for applying grease to the chain stabilizer for maintenance.
Procedure for replacing the guide pulley and tension pulley.
To Next Page