Need help?Do you have a question about the Shimano MTB SHADOW RD-M786 and is the answer not in the manual?
Procedure for mounting rear derailleurs on direct-mount compatible frames.
Instructions for converting a bracket-equipped type to a direct mount type.
Details on installing and using the mode converter for specific sprocket compatibility.
Guide on using the end adjust bolt for fine-tuning rear derailleur settings.
Step-by-step process for optimizing the SIS (Shifting Index System) performance.
Procedure for replacing the bump stopper or holder on the RD-M820 model.
Instructions for replacing the plate and plate tension spring on RD-M986.
Procedure for replacing the plate and tension spring on models other than RD-M986.
Guide to replacing the B tension spring on RD-M4000 and RD-M3000 models.
Steps to adjust the friction mechanism for the RD-M986 rear derailleur.
Procedure for adjusting the friction mechanism on models other than RD-M986.
Instructions for applying grease to the chain stabilizer to maintain performance.
Process for removing and replacing the guide pulley and tension pulley.
Procedure for mounting rear derailleurs on direct-mount compatible frames.
Instructions for converting a bracket-equipped type to a direct mount type.
Details on installing and using the mode converter for specific sprocket compatibility.
Guide on using the end adjust bolt for fine-tuning rear derailleur settings.
Step-by-step process for optimizing the SIS (Shifting Index System) performance.
Procedure for replacing the bump stopper or holder on the RD-M820 model.
Instructions for replacing the plate and plate tension spring on RD-M986.
Procedure for replacing the plate and tension spring on models other than RD-M986.
Guide to replacing the B tension spring on RD-M4000 and RD-M3000 models.
Steps to adjust the friction mechanism for the RD-M986 rear derailleur.
Procedure for adjusting the friction mechanism on models other than RD-M986.
Instructions for applying grease to the chain stabilizer to maintain performance.
Process for removing and replacing the guide pulley and tension pulley.
General| Series | DEORE XT |
|---|---|
| Max Front Difference | 18T |
| Compatible Chain | HG-X 10-speed |
| Low Sprocket Max | 36T |
| Low Sprocket Min | 32T |
| Top Sprocket Max | 11T |
| Top Sprocket Min | 11T |
| Pulley Teeth | 11T |
| Rear Speeds | 10 |
| Model | RD-M786 |
| Mount Type | Direct Attachment |
| Cage Size | GS |
| Technology | SHADOW |
To Next Page