Need help?Do you have a question about the Shimano MTB SHADOW RD-M610 and is the answer not in the manual?
General| Series | Deore |
|---|---|
| Model Number | RD-M610 |
| Compatibility | Shimano 10-speed |
| Mount Type | Direct Mount |
| Cage Size | Medium |
| Max Sprocket Size | 36T |
| Min Sprocket Size | 11T |
| Maximum Front Difference | 22T |
| Pulley Teeth | 11T |
| Material | Aluminum |
| Technology | SHADOW |
| Total Capacity | 35T |
| Cage Length | Long, Medium |
Describes the direct mount installation method for rear derailleurs.
Details the procedure for replacing a direct mount rear derailleur type.
Explains the installation and use of the mode converter for the RD-M820 derailleur.
Guide on using the end adjust bolt for adjusting SHADOW RD+ rear derailleurs.
Verifies guide pulley clearance with sprockets for RD-M820/M640 models.
Provides steps for performing SIS cable adjustment on SHADOW RD+ systems.
Procedure for replacing the bump stopper/holder component on the RD-M820.
Steps for replacing the plate and tension spring on the RD-M986 model.
Procedure for replacing plate and tension spring on models other than RD-M986.
Instructions for replacing the B tension spring on RD-M4000 and RD-M3000.
Details how to adjust the friction mechanism on the RD-M986 derailleur.
Details how to adjust the friction mechanism on derailleurs other than RD-M986.
Procedure for applying grease to the chain stabilizer for optimal performance.
Step-by-step guide for replacing the guide and tension pulleys.
To Next Page