To Next PageTo Next PageHow to improve low efficiency of cooling or heating for my Shinco Air Conditioner?
If your Shinco Air Conditioner has low efficiency of cooling or heating, it might be because the air filters are too dirty, or the intake or outlet vent is blocked up. In heating operation, defrosting operation may be required if the ambient temperature is too low.
What to do if my Shinco Air Conditioner does not work?
If your Shinco Air Conditioner isn't working, there might be a problem with the remote control or the voltage. Try shutting off the power, waiting 3 minutes, and then restarting the unit. Also, verify the circuit breaker or fuse.
Why is my Shinco Air Conditioner not blowing warm air in heating mode?
If your Shinco Air Conditioner isn't blowing warm air in heating mode, it might be because the compressor is in a delay mode. To protect the compressor, there's a delay of several minutes every time it starts. Please wait a few minutes after starting the unit. Also, the hot air will be blown out only after the defrosting operation.
What to do if I see abnormality on the remote control screen of my Shinco Air Conditioner?
If you notice an abnormality on the remote control screen of your Shinco Air Conditioner, the batteries might need to be replaced, or they might be inserted incorrectly. Take the batteries out and insert them again.
Why is my Shinco Air Conditioner leaking cold water?
Cold water leaking from your Shinco Air Conditioner may be due to moisture occurring at the air outlet because of the temperature difference.
Why is my Shinco KFR-35GWZ/BM making noise?
The noise coming from your Shinco Air Conditioner could be due to a water leak sound, which is the sound of the circulation of refrigerant. In heating operation, during defrosting, it is the sound of the back-flow refrigerant because of condensed air leaking out.
General| Brand | Shinco |
|---|---|
| Model | KFR-35GWZ/BM |
| Category | Air Conditioner |
| Language | English |
Safety guidelines for installing the air conditioner unit.
Safety warnings and guidelines for operating the air conditioner.
Identifies and describes the indoor and outdoor unit components.
Explains the functions and buttons of the remote control.
Instructions for installing batteries and setting the clock on the unit.
How to adjust fan speed, air direction, and set timers.
Guides for using Cooling, Heating, Dehumidify, Fan, and Drying modes.
Instructions for Auto, Powerful, and Sleep modes for enhanced comfort.
How to change temperature units, use sensor mode, and perform basic maintenance.
Tips for maximizing the air conditioner's energy efficiency.
Common problems and their solutions for the air conditioner.
Guidelines for choosing the best location for indoor and outdoor units.
Step-by-step instructions for mounting the indoor unit.
How to connect power and install the water drainage hose.
How to route and secure the refrigerant and drain pipes.
Instructions for installing the outdoor unit on a suitable base.
Details on connecting indoor/outdoor pipes and installing the drain hose.
Installing external drain pipe and verifying system vacuum and leak checks.
How to perform a test run to ensure proper operation.
Guidance for service technicians on explaining operation to users.
