To Next PageTo Next Page
Need help?Do you have a question about the Shindaiwa 377 and is the answer not in the manual?
Explains the meaning of Warning, Caution, Important, and Note statements used in the manual.
Details kickback risks and emphasizes the need for professional service for the chainsaw.
Explains the function of the chain brake and low kick chain features for safety.
Details safety equipment designed to reduce kickback risk on the chainsaw.
Proper grip and operating techniques to prevent kickback incidents.
Covers clearing work area, sharpening, and using correct parts for safety.
Essential safety rules for operating the chainsaw, including PPE.
Safety for transport, specific cutting situations, and component care.
Stresses the importance of labels and how to replace damaged ones.
Information on the muffler system and recommended bar/chain.
Identifies key parts of the chainsaw and their functions.
Lists the tools provided with the chainsaw.
Lists approved bar and chain types for specific models.
Covers chain brake disengagement, cover removal, and bar placement.
Details installing the chain loop over the sprocket and fitting the clutch cover.
Explains how to adjust chain tension and re-adjust in the field.
Instructions for mixing fuel and safety precautions during refueling.
Procedure for filling the saw's oil reservoir with bar oil.
How to adjust the automatic oil pump's lubrication rate.
Explains fast idle feature and the step-by-step engine start process.
Details choke usage for cold vs. warm engine starting.
Instructions for safely stopping the engine after use.
Steps to take if the engine is flooded with fuel and fails to start.
How to adjust the engine's idle speed for EPA compliant engines.
Procedures for adjusting fuel mixture for EPA compliant engines.
How to adjust low-speed mixture for non-EPA compliant engines.
How to adjust high-speed mixture for non-EPA compliant engines.
Explains how to operate the chain brake lever.
Procedure to test the chain brake for proper adjustment.
Details how to adjust the chain brake mechanism.
Covers cleaning and general maintenance of the chain brake.
Emphasizes proper techniques, full throttle, and safety gear.
Steps before felling, including inspection and clearing the area.
Method for felling trees under 6" diameter.
Technique for felling trees over 6" diameter, including notch and hinge.
Methods for cutting logs into sections, including overbuck and underbuck.
Procedure for removing branches from a standing tree.
Routine cleaning and inspection tasks for daily upkeep.
Instructions for cleaning and replacing the air filter element.
Sharpening chain, cleaning bar groove, and inspecting for wear.
Specific maintenance tasks after 10-15 hours of operation.
Specific maintenance tasks after 40-50 hours of operation.
How to clean the spark arrester screen for maximum performance.
Procedures for preparing the saw for storage over 30 days.
Explains the mechanics of how the saw chain cuts wood.
Step-by-step guide for sharpening saw chain cutters correctly.
Identifies common filing issues and provides solutions.
Flowchart for identifying causes of engine starting problems.
Identifies reasons for engine overheating and possible remedies.
Addresses issues causing rough running and engine knocking.
Solutions for poor acceleration and sudden engine stoppage.
Addresses engine not stopping, chain rotation at idle, and vibration.
Details emission warranty terms and owner responsibilities.
Explains the meaning of Warning, Caution, Important, and Note statements used in the manual.
Details kickback risks and emphasizes the need for professional service for the chainsaw.
Explains the function of the chain brake and low kick chain features for safety.
Details safety equipment designed to reduce kickback risk on the chainsaw.
Proper grip and operating techniques to prevent kickback incidents.
Covers clearing work area, sharpening, and using correct parts for safety.
Essential safety rules for operating the chainsaw, including PPE.
Safety for transport, specific cutting situations, and component care.
Stresses the importance of labels and how to replace damaged ones.
Information on the muffler system and recommended bar/chain.
Identifies key parts of the chainsaw and their functions.
Lists the tools provided with the chainsaw.
Lists approved bar and chain types for specific models.
Covers chain brake disengagement, cover removal, and bar placement.
Details installing the chain loop over the sprocket and fitting the clutch cover.
Explains how to adjust chain tension and re-adjust in the field.
Instructions for mixing fuel and safety precautions during refueling.
Procedure for filling the saw's oil reservoir with bar oil.
How to adjust the automatic oil pump's lubrication rate.
Explains fast idle feature and the step-by-step engine start process.
Details choke usage for cold vs. warm engine starting.
Instructions for safely stopping the engine after use.
Steps to take if the engine is flooded with fuel and fails to start.
How to adjust the engine's idle speed for EPA compliant engines.
Procedures for adjusting fuel mixture for EPA compliant engines.
How to adjust low-speed mixture for non-EPA compliant engines.
How to adjust high-speed mixture for non-EPA compliant engines.
Explains how to operate the chain brake lever.
Procedure to test the chain brake for proper adjustment.
Details how to adjust the chain brake mechanism.
Covers cleaning and general maintenance of the chain brake.
Emphasizes proper techniques, full throttle, and safety gear.
Steps before felling, including inspection and clearing the area.
Method for felling trees under 6" diameter.
Technique for felling trees over 6" diameter, including notch and hinge.
Methods for cutting logs into sections, including overbuck and underbuck.
Procedure for removing branches from a standing tree.
Routine cleaning and inspection tasks for daily upkeep.
Instructions for cleaning and replacing the air filter element.
Sharpening chain, cleaning bar groove, and inspecting for wear.
Specific maintenance tasks after 10-15 hours of operation.
Specific maintenance tasks after 40-50 hours of operation.
How to clean the spark arrester screen for maximum performance.
Procedures for preparing the saw for storage over 30 days.
Explains the mechanics of how the saw chain cuts wood.
Step-by-step guide for sharpening saw chain cutters correctly.
Identifies common filing issues and provides solutions.
Flowchart for identifying causes of engine starting problems.
Identifies reasons for engine overheating and possible remedies.
Addresses issues causing rough running and engine knocking.
Solutions for poor acceleration and sudden engine stoppage.
Addresses engine not stopping, chain rotation at idle, and vibration.
Details emission warranty terms and owner responsibilities.
General
