Shindaiwa Speed-Feed 375 - User Manual

Shindaiwa Illustrated Parts List
www.shindaiwa.com
11975 SW Herman Road
Tualatin, Oregon 97062, U.S.A.
1 + 503.692.3070 • fax 1 + 503.692.6696 •
Speed-Feed
®
375
Trimmer Head
Part Number SPEED-FEED 375_IPL_81710_03JP Effective 05/07
All Speed-Feed
®
trimmer heads are pre-wound with .095” (2.4mm)
Silentwist™ trimmer line.
SPEED-FEED
®
375
P/N 78890-11000
........................................................................................ 2
P/N 78890-12000
........................................................................................ 3
P/N 78890-13000
........................................................................................ 4
P/N 78890-14000
........................................................................................ 5

Summary

Speed-Feed 375 Trimmer Head Overview

Speed-Feed 375, 7 MM LH (P;N 78890-11000)

Parts list and diagram for the Speed-Feed 375 trimmer head, 7MM LH, part number 78890-11000.

Speed-Feed 375, 7 MM LH (P;N 78890-12000)

Parts list and diagram for the Speed-Feed 375 trimmer head, 7MM LH, part number 78890-12000.

Speed-Feed 375, 8 MM LH (P;N 78890-13000)

Parts list and diagram for the Speed-Feed 375 trimmer head, 8MM LH, part number 78890-13000.

Speed-Feed 375, 8 MM RH (P;N 78890-14000)

Parts list and diagram for the Speed-Feed 375 trimmer head, 8MM RH, part number 78890-14000.

Shindaiwa Speed-Feed 375 Specifications

General

Type	Trimmer Head
Line Diameter	0.095 inches
Line Capacity	20 feet
Compatibility	Most straight shaft trimmers
Shaft Type	Straight
Thread Size	Multiple arbor sizes included (8mm x 1.25 LHM, 10mm x 1.0 LHM, 10mm x 1.25 LHM)