Shindaiwa T302 - User Manual

X7502350700
© 4/2018 ECHO Inc.
ENGLISH
Specifications, descriptions and illustrative material in this literature are
as accurate as known at the time of publication, but are subject to
change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Operator’s Manual
x7722271404 / x772000164
T302
GRASS TRIMMER
/ BRUSH CUTTER
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects, or
other reproductive harm.
Read and understand all provided literature before use.
Failure to do so could result in serious injury.
This product complies with CAN ICES-2/NMB-2

Summary

Introduction and Servicing Information

Servicing Information

Information regarding product service, parts, and dealer support.

Safety Guidelines

Manual Safety Symbols and Important Information

Explanation of safety alert symbols like DANGER, WARNING, and CAUTION.

International Symbols

Explanation of common symbols used in the manual and on the equipment.

Bystander and Area Safety

Instruction to keep people and animals at a safe distance from the operating unit.

Operator Condition and Personal Protective Equipment

Guidance on operator's physical condition and required safety gear.

Eye Protection Requirements

Requirement to wear eye protection meeting ANSI Z87.1 or CE standards.

Proper Clothing and Footwear

Guidelines for wearing snug-fitting, durable clothing and footwear.

Medical and Environmental Safety Warnings

Warnings about pacemaker interference and precautions for cold/vibration exposure.

Health Risks and Electrical Hazards

Information on RSI/CTS and dangers of electrical conductors.

Operational Safety Procedures

Checks for equipment, work area clearance, and reading manuals.

Moving Parts and Fuel System Safety

Warnings about moving parts and checking fuel system for leaks.

Emission Control Information

CARB and EPA Emissions Compliance

Information on emission control systems and compliance labels for engines.

Product Description and Decals

Locate and Understand Safety Decals

Instruction to ensure safety decals are legible and understood.

Assembly Instructions

Support Handle Installation

Instructions for positioning and tightening the support handle.

Line Installation for HDFH Models

Procedure for installing trimmer line on HDFH model cutting heads.

Operation Procedures

Operational Safety Warnings

Warnings about moving parts, exhaust hazards, and sparks during operation.

Fuel Requirements and Handling

Specifications for approved fuels/oils and safe fuel handling practices.

Mixing Fuel and Oil

Step-by-step guide for mixing gasoline and two-stroke oil at a 50:1 ratio.

Fuel Storage and Disposal

Notice on fuel storage, aging, and disposal of used materials.

Starting the Engine

Starting a Cold Engine

Procedure for starting the engine from a cold state using controls.

Starting a Warm Engine

Procedure for starting the engine when it is already warm.

Stopping the Engine

Procedure for safely shutting down the engine using the stop switch.

Maintenance Procedures

Applications and Operating Techniques

Description of uses and tips for effective operation of the trimmer.

Maintenance Intervals and Skill Levels

Table outlining maintenance tasks, frequency, and required skill levels.

Air Filter and Fuel Filter Maintenance

Procedures for inspecting and cleaning/replacing air and fuel filters.

Spark Plug and Cooling System Care

Maintenance steps for the spark plug and cleaning the cooling system.

Exhaust System and Carburetor Adjustment

Cleaning exhaust components and adjusting the carburetor.

Lubrication and Drive Shaft Service

Instructions for lubricating the gear housing and drive shaft.

Nylon Line Head Service

Disassembly instructions and nylon line replacement for the cutting head.

Troubleshooting Engine Problems

Speed-Feed Head Wear Indicators

Information on wear indicators for Speed-Feed head and replacement needs.

Engine Problem Troubleshooting Chart

Chart for troubleshooting engine starting, running, and acceleration problems.

Engine Performance Troubleshooting

Detailed chart for troubleshooting engine starting, running, and acceleration issues.

Storage Procedures

Long Term Storage (Over 30 Days)

Procedure for preparing the unit for storage longer than 30 days.

Product Specifications

Model T302 Technical Details

Detailed technical specifications including dimensions, engine, and components.

Handle and Speed Specifications

Specifications for handle types, idle speed, and clutch engagement speeds.

Product Registration

Online Registration Process

Instructions for registering the product online for updates and warranty.

Product Registration Card Details

Information and fields for filling out the product registration card.

Shindaiwa T302 Specifications

General

Brand	Shindaiwa
Model	T302
Category	Trimmer
Language	English