Need help?Do you have a question about the ShinewayTech OPM-50 and is the answer not in the manual?
General| Brand | ShinewayTech |
|---|---|
| Model | OPM-50 |
| Category | Measuring Instruments |
| Language | English |
Explains the meaning of Warning, Caution, and Note signs used in the manual for hazard communication.
Advises against looking directly into optic output and using magnifiers to prevent permanent eye damage.
Details precautions for handling the lithium battery, including avoiding fire, heat, opening, and contact with electrolyte.
Specifies external power supply requirements and warns against looking directly into optical outputs of fiber optic equipment.
Outlines the purpose and content of the user manual for the ShinewayTech instrument.
Provides instructions for unpacking the instrument and inspecting for shipping damage.
Introduces the OPM-50's capabilities and lists its key features for fiber link testing.
Introduces the basic operation of the OPM-50 and directs users to Chapter 3 for specific details.
Explains how the OPM-50 automatically identifies optical signal wavelengths for test mode switching.
Describes setting reference values remotely from a laser source for precise link loss measurement.
Details the feature allowing test data saving with time and editable fiber serial number information.
Explains the OPM-50's application in measuring Triple-play signals on Passive Optical Networks (PON).
Describes the optical input port and USB power/data port on the OPM-50.
Explains the function of each button on the OPM-50 keypad for operation and navigation.
Describes the charging indicator light and its meaning on the OPM-50.
Provides instructions on battery usage, low battery indication, and long-term storage of the instrument.
Details the procedure and precautions for cleaning optical connectors to ensure accurate measurements.
Instructions on how to power on the OPM-50, including the loading screen and functional interface.
Explains how to toggle between different functional interfaces using the device's buttons.
Guide on how to access and adjust the display contrast settings on the OPM-50.
Details the process of zeroing the OPM-50 for accurate low-power measurements and troubleshooting errors.
Explains how to set reference values, either automatically via AutoID or manually adjusting measured power.
Instructions on how to access and review previously saved test records on the OPM-50.
Guide on how to delete individual saved test records and confirm the deletion process.
Procedure for setting the current date and time on the OPM-50, including digit adjustment.
Instructions on how to load the instrument's default factory settings.
Guide on how to change the interface language between English and Chinese.
Instructions on enabling or disabling the automatic power-off feature for power saving.
Emphasizes keeping the optical interface clean and using protective dust caps when not in use.
Recommends instrument calibration every 3 years and advises contacting representatives for service.
Details the technical specifications of the OPM-50, including model, wavelengths, power range, accuracy, and dimensions.
Outlines the one-year warranty against defective material and workmanship for Shinewaytech products.
Lists conditions under which the warranty does not apply, such as unauthorized repair or misuse.
Instructions on filling out and mailing the warranty registration card for product activation.
Guidance on contacting customer service to obtain RMA for calibration, repair, or maintenance.
Provides contact details for Shineway Technologies (China), Inc., including address, phone, fax, and email.
To Next Page
