What to do if ShinewayTech MTP-200 fails to power on?
If your ShinewayTech Measuring Instruments won't turn on, there are several potential causes. First, the battery might be completely drained, so try charging it. Alternatively, try using a new battery or connecting the device to an external power supply. Ensure the external power supply is properly connected at both ends. Also, verify that the battery dock cover is securely closed.
How to fix a black screen on ShinewayTech MTP-200 Measuring Instruments?
If your ShinewayTech Measuring Instruments screen is black but the power indicator is on, press any key to exit power saving mode. If the power indicator is off, the battery may be drained; try charging it. Alternatively, try using a new battery or connecting the device to an external power supply.
Why is the operation time short for ShinewayTech Measuring Instruments?
If the operation time of your ShinewayTech Measuring Instruments is shorter than expected, it could be due to several reasons. The battery might be running out, so try changing it. Alternatively, the battery might not be fully charged, so ensure it is fully charged. You may also need to re-calibrate the battery.
What to do if ShinewayTech MTP-200 external keypad is not responding?
If the external keypad for your ShinewayTech Measuring Instruments is not responding, first unplug the keypad and then plug it back in. If that doesn't work, power off the device, plug in the keypad, and then power the device back on.
Why is the external mouse not responding on ShinewayTech MTP-200?
If the external mouse is not responding on your ShinewayTech Measuring Instruments, try unplugging the mouse and plugging it back in. If this does not resolve the issue, power off the device, plug in the mouse, and then power the device back on.
How to display expected events that are not shown in the trace on ShinewayTech MTP-200 Measuring Instruments?
If expected events are not shown in the trace on your ShinewayTech Measuring Instruments, it may be because the events are too close to each other; try again with a short pulse width. As an alternative, try testing from the other end of the fiber. Also, poor SNR can cause this issue, so try again with a wide pulse width or increase the averaging time. Finally, check the OTDR parameters, such as reflection threshold, non-reflection threshold, and end threshold, and then re-analyze or test again.
How to resolve screen display blurs on ShinewayTech MTP-200?
If the screen display on your ShinewayTech Measuring Instruments appears blurry, the brightness may not be set properly. Try adjusting the brightness to see if this resolves the issue.
What to do if ShinewayTech Measuring Instruments indicates low battery after fully charged?
If your ShinewayTech Measuring Instruments indicates low battery even after being fully charged, re-calibrate the battery.
Why do special events appear at the end of the trace in ShinewayTech Measuring Instruments?
If special events appear at the end of the trace on your ShinewayTech Measuring Instruments, it could be due to a wrong configuration, such as a wrong end threshold setting; adjust the configuration and test again. Another cause may be that the fiber under test is too long, exceeding the range; select the proper range and test again.
What to do if ShinewayTech Measuring Instruments application is not responding?
If an application on your ShinewayTech Measuring Instruments is not responding, restart the device and run the application again. The issue may be due to a problem error.
Details warranty terms, exclusions, and registration for the product.
Provides essential safety guidelines for operating the instrument, including laser and electric safety.
Outlines terms and conventions used in the manual.
Introduces the MTP-200, its features, appearance, and interface elements.
Covers power supply options, battery charging, and calibration procedures.
Guides on powering on/off, power saving, and starting applications.
Configuration of language, time, touch screen, and default settings.
Explains OTDR working principles, measurement applications, and event types.
Details various measurement modes like Auto, Manual, Averaging, and Realtime.
Navigating the OTDR interface and processing acquired trace data.
Steps for connecting fibers and cleaning ports before testing.
Guides on quick tests, trace acquisition, and various testing parameters.
Techniques for zooming, marking, and analyzing trace data and events.
Procedures for saving, opening, copying, and deleting trace files.
Steps for generating and printing test reports.
Information on the built-in stabilized laser source and optical power meter.
How to use the VFL for fiber identification and fault locating.
Using the OCI for inspecting and analyzing fiber connector quality.
Guidelines for cleaning optical interfaces and general maintenance.
Solutions for common problems like power, screen, and trace measurement errors.
Details warranty coverage, return procedures, and customer service contact.
Lists standard package items and optional modules available.
General| Brand | ShinewayTech |
|---|---|
| Model | MTP-200 Series |
| Category | Measuring Instruments |
| Language | English |
To Next Page
