MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 32 -
◆ For more operation on events, please refer to “Trace Analysis and Event
Operation”.
7.9 Upload Trace to PC
On computer, user can manage the trace file flexibly.
Copy or move the trace to computer:
1. User can copy the saved trace to computer via USB by PC software
2. Or user can copy and move the saved trace to computer by mobile hard disk
drive/ USB flash disk
For more operation, please refer to “Manage files and data”
7.10 Get help on OTDR
Click [Help] or “?” (HELP) to get detailed help, click “ ”(BACK) to exit.
8 Testing Optical Fiber in Auto Mode
8.1 Instruction of Auto Testing Mode
When don’t know the optical fiber length, can simply use the auto testing function to get the
trace and analyze.
After the auto mode started, OTDR will automatically estimate the optical fiber length, set
sampling parameter, get trace and display the event list and etc.
Under Auto Mode, user can set follow parameters directly.
➢ The wavelength be used for testing( at least one wavelength)
➢ Testing time span
To Next Page
Loading...