MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 69 -
Adding or updating the information can be completed in {Trace Info.}.
14.2 Check and Edit Trace Information
User can check and edit trace information in {Trace Info.} function window.
When newly tested trace is saved, the trace is saved with above information.
User can also edit saved trace information and save the trace with updated information.
◆ After editing trace information of a saved trace, the updated trace file name will
show a star sign (“*”) to indicate the change. If user closes the editing window
without saving, system will promote user to save.
◆ The update to trace information is only effective to current active trace in
Multi-trace display mode.
◆ Editing trace information does not affect measurement parameters and result.
Edit and save trace information:
1. Click {Trace Info.} label in OTDR main interface.
Fig. 14.1 Trace information and editing
2. Press [Edit] button and trace window will pop up.
3. Input trace information in the pop-up window.
To Next Page
Loading...
