ShinewayTech MTP-200 Series - Use Zoom Toolbar to Zoom the Trace; Revert the Whole Trace View; Zoom in Trace Horizontally; Zoom out Trace Horizontally

MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 47 -
◆ The trace can’t be contracted more after contracted to 1:1 size.
◆ Application program will maintain the zoom situation for further test and check of
similar trace.
11.11 Use Zoom Toolbar to Zoom the Trace
On the right side of trace window, there is a zoom toolbar vertical ranked. Can use the zoom
toolbar to zoom the trace to check the event detail on the trace.
◆ Press the magnify button for the first time, trace window will display the trace in
the middle.
◆ After the trace magnified, in order to move trace window, click the place outside
the magnified area, trace window will move around this place. Also can use the
direction key on the front panel to move the trace.
11.11.1 Revert the Whole Trace View
Click [ ] to revert the whole trace view.
11.11.2 Zoom In Trace Horizontally
Click [ ] to zoom in the trace horizontally.
11.11.3 Zoom Out Trace Horizontally
This function is to zoom out trace horizontally. Click to zoom out trace.
11.11.4 Zoom In Trace Vertically
Click [ ] to Zoom in trace vertically.