ShinewayTech MTP-200 Series - Install USB Keyboard;Mouse

MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 11 -
Fig. 2.1 Main Interface
Launch OTDR program:
1. Select “Modules” label and then “OTDR Module” in main menu, the part will be
highlighted.
2. Then click [Start] to start program.
Launch Multifunctional module or optical connector inspector module application
program:
1. Select “Modules” label, then “multifunctional module “or “optical connector
inspector module”.
2. Then click [Start] to start the program.
(Note: Double click the module label to start the application)
Application program is available only when relative functional is purchased.
2.6 Install USB Keyboard/Mouse
When need to input numbers and letters etc, there will be a soft keyboard displayed on the
screen, user can use stylus do the input. Or, user can use keyboard with USB port or USB
mouse to do the input.
Install USB keyboard or mouse on MTP-200
Connect keyboard or mouse to the USB port, the port is on the top of MTP-200.
◆ No need to close MTP-200 before connecting the keyboard and mouse. Software
will recognize the keyboard or mouse.
◆ The soft keyboard will still be displayed on the screen even the keyboard is
connected.
◆ System will recognize the mouse or keyboard and use them immediately.