MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 42 -
Fig. 11.1 Trace file opened
◆ Check or open “.jpg” format trace file, please use the “File Explorer” in
{Program}.
◆ Can’t open bidirectional trace file on instrument. If need to, use the bidirectional
analysis program provided by MTP-Suite which installed on computer.
11.2 Simultaneous Display Multi Traces
In order to let user compare trace files, MTP-200 support opening and displaying multi
traces.
When open multi trace, current trace is red, the icon in front of the file name is red, other
icons are grey.
Open single trace or multi trace, user need to set.
Open multi traces setting:
In OTDR [Setup], in the options of test, select the “Support multi traces“.
To Next Page
Loading...
