MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 46 -
11.8 Lock AB Markers
In the surface of {Markers}, press down [|A-B|], A and B Markers will be locked.
After AB Markers locked, when moving one Marker, the other one will move with it and the
distance maintains the same.
For some special tests, this function may be more convenient.
When one Markers move to the trace boundary, the distance between AB won’t maintain.
But it will revert when it’s not on the trace boundary.
11.9 Zoom the Trace
In order to check the event or detail in the trace, it needs to zoom the trace.
System provide two ways to zoom the trace for easier use for the user:
1. Zoom the trace by cross frame, operation is smooth and fast
2. Use the zoom toolbar on the right side, operation is easier and directly perceived
◆ After magnify operation, Markers may disappear from the current trace window
◆ Method 2, it needs to open the option of “display zoom toolbar”
11.10 Cross Frame to Zoom the Trace
In the trace display area, magnify the traces by cross frame from upper left to lower right.
In the trace display area, contract the trace from upper right to lower left.
Repeat above operation mentioned to magnify or contract the trace continuously.
◆ Do not cross to the outside of the trace display area, otherwise the operation won’t
have a respond.
◆ The trace can’t be magnify unlimited, it can’t be magnified after a certain degree.
To Next Page
Loading...