ShinewayTech MTP-200 Series - Laser Safety Announcements; Electric Safety Announcements

MTP-200 Series User’s Manual
Shineway Technologies, Inc. - v -
The NOTE sign information that may be beneficial during the use
and maintenance of MTP-200.
Laser Safety Announcements
MTP-200 is a laser instrument. Users should avoid looking directly into the optic
output.
➢ Always avoid looking directly into the optical output port, when MTP-200 is
working. And the use of microscope or magnifier should also be avoided, for
the use of such devices can focus a highly intense beam onto the retina, which
may result in permanent eye damage.
➢ Always replace protective dust cap on the probe port when MTP-200 is not
being used.
➢ Always avoid looking directly at unconnected end of optic fiber in testing and
make the unconnected end pointing at a non-reflective object if available.
Electric Safety Announcements
If need to assure instrument thorough outage, please pull up power line and take the battery
out.
◆ AC/DC adaptor should be used only indoors.
◆ The ambient air of MTP-200 place should be free flow.
◆ Any using of electric tools near inflammable gas or smog will be a big safety threat.
◆ In order to avoid electric shock, please don’t use instrument if there is damage on
any outside surface part(top cover, panel, etc)
◆ Only qualified professional staff can do electrified adjustment, maintenance and
repair to the operating instrument.
◆ Even MTP-200 power is cut off; the capacity in MTP-200 might be electrified in
some time after that.