MTP-200 Series User’s Manual
Shineway Technologies, Inc. - iv -
impaired if it is used in a manner not specified in the operation instrument.
Environmental Conditions
It is designed to operate at a maximum relative humidity of 95% and at altitudes of up to
2000 meters. Refer to the specifications tables.
Before Applying Power
Verify that the product is set to match the available line voltage, the correct fuse is installed,
and all safety precautions are taken. Note MTP-200’s external markings described under
Symbols.
Do Not Operate in an Explosive Atmosphere
Do not operate MTP-200 in the presence of flammable gases or fumes.
Do Not Remove MTP-200 Cover
Operating personnel must not remove instrument covers. Component replacement and
internal adjustments must be made only by qualified service personnel.
Instrument that appears damaged or defective should be made inoperative and secured
against unintended operation until they can be repaired by qualified service personnel.
Safety Terms Used in This Manual
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personnel injury. Do not proceed beyond a
WARNING sign until the indicated conditions are fully understood
and met.
The CAUTION sign denotes a hazard. It calls attention to an
operating procedure, or the like, which, if not correctly performed or
adhered to, could result in damage to or destruction of part or the
entire product. Do not proceed beyond a CAUTION sign until the
indicated conditions are fully understood and met.
To Next Page
Loading...
