MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 77 -
Fig. 17.1 VFL operation
18 OCI (Optical Connector Inspector) of MCI100
MCI100 Optical Connector Inspector (OCI) can display connector surface enlarged view and find
dirty or damaged connector. It is convent for the operator to view the connector and remove any
hidden troubles,which may affect the transmission quality.
Optical fiber end face microscope connects the OCI by USB, and LCD displays the fiber end
image. Then user can judge it qualified or not. In order to meet different tests, MCI100 offers
kinds of specifications of male and female port adapter, including SC, FC, LC, MU and etc.
MCI100 support the following video fiber inspection probe for common functions:
➢ Zoom in control: Support 200x and 400x.
➢ Focus control: Fine tuning display quality.
➢ Image capture: Can capture and save the image which displays in the LCD.
MCI100 is only available with the OTDR module built-in MCI100.
18.1 Inspect the Optical Connector
1. Connect the probe to the OCI port .
2. Test fiber inserts the probe connector (Please select a suitable size connector).
3. Click “OCI” icon to enter Optical Connector Inspector interface as shown in Fig 18.1.
To Next Page
Loading...
