MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 68 -
13.3 Check Disk Space
User can check disk space utilization status (used space and free space) in File Explorer:
1. Enter File Explorer in MTP-200 main interface.
2. Click “SDMMC_Disk” icon and select [File] <Properties> or click and hold
“SDMMC_Disk” icon, select <Properties> from pop-up menu.
3. “SDMMC_Disk” space utilization status is shown below:
Fig. 13.2 Check disk space utilization
4. Click “OK” to exit disk properties.
It’s suggested to check disk space utilization status from time to time and transfer or back up
files to avoid insufficient disk space when MTP-200 is in use.
14 Print OTDR Report
User can manage saved trace files in MTP-200 and print report.
For reference and report printing, it is necessary to manage and update trace information.
14.1 Trace Information
After trace acquisition, user can add or update tested fiber information which includes:
Cable ID, Fiber ID, Fiber Type, Start Location, End Location and Operator.
To Next Page
Loading...