MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 13 -
Fig. 2.3 Printer setting interface
6. In the printer list, choose the printer relative; chose “LPT1:”in the port list.
Other options default is ok.
7. After right selection, click “OK” to finish the printer configuration.
◆ MTP-200 only support USB port printer with PCL language; till now the printers
passed the test are HP LaserJet 1022 and Hp Laser P2015d etc.
◆ If the printer is not connected well, pull out the USB cable and reconnect the
printer.
◆ No need to shut down MTP-200 when connecting the printer.
3 Common Settings and Special Settings
3.1 Main Setting Menu
In setting menu, user can set up many settings, including interface style, language, power
saving, system setting, touch screen calibration and etc.
Enter main setting menu:
When power is on, press the [Setup] button to enter the setting menu, as shown below:
To Next Page
Loading...
