MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 30 -
including loss, attenuation, reflection and etc. All of their operation can be realized by
mouse or stylus.
Zoom in/out trace:
➢ In trace display area, draw selection frame from left upper corner to right lower
corner to zoom in trace.
➢ Draw selection frame from right lower corner to left upper corner to zoom out
trace.
Show A/B marker:
➢ Click {Markers} label in OTDR main interface and markers or marker labels will
show in trace display area.
Move marker quickly:
➢ Select and hold the marker, drag it left or right to move quickly.
➢ Or click [ ] [ ] button on {Markers} label to move active marker left or
right.
Switch A/B markers:
➢ Click [ ] or [ ] button to switch A/B markers on {Markers} label.
➢ Or click the marker to select in trace display area with stylus or mouse.
◆ When holding and moving marker with stylus, please apply adequate force or the
operation may not be successful. Please try several times to get used to it.
◆ Marker operation and re-analysis are not applicable to ‘.jpg“ format trace.
◆ For more information, please refer to “Trace Analysis and Event Operation”.
7.8 Information and Function Windows
Information and function windows are located at the bottom of OTDR interface.
To Next Page
Loading...
