MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 82 -
19.2 Transfer Files or Folders between MTP-200 and PC
Microsoft ActiveSync software must be installed first on PC for file transfer between
MTP-200 and PC.
Some necessary software shall be installed on PC before connecting MTP-200 to PC. For
more information about installation, please refer to the instructions in software setup CD.
1. If Microsoft ActiveSync software is not installed on PC, please install following
the software setup instruction.
2. Connect the USB cable’s type A end (flat) to PC and type B end ( ) to
MTP-200.
3. After Microsoft ActiveSync software is installed and indicates “Connected”, click
“Explore” to access the files and folders in MTP-200; or enter MTP-200 and
access the files and folders from My Computer.
Fig. 19.1 ActiveSync connected
4. After file transfer, simply disconnect the USB cable.
It’s no need to turn off PC and MTP-200 when connect and disconnect USB cable.
To Next Page
Loading...