MTP-200 User’s Manual
Shineway Technologies, Inc. - 89 -
22 Warranty
22.1 Terms of Warranty
All ShinewayTech
products are warranted against defective material and workmanship for a
period of one (1) year from the date of shipment to the original customer. Any product found to be
defective within the warranty period would be repaired or replaced by Shineway Technologies Inc.
free of charge. In no case will Shineway Technologies, Inc. liabilities exceed the original purchase
price of the product.
22.2 Exclusion
The warranty on your equipment shall not apply to defects resulting from the following:
➢ Unauthorized repair or modification
➢ Misuse, negligence, or accident
Shineway Technologies, Inc. reserves the right to make changes to any of its products at any time
without having to replace or change previously purchased units.
22.3 Warranty Registration
A warranty registration card is included with the original shipment of equipment. Please take a
few moments to fill out the card and mail or fax it to the local Customer Service Center of
Shineway Technologies, Inc. to ensure proper initiation of your warranty term and scope of your
warranty.
22.4 Returning Instruments
To return instrument for reasons of yearly calibration or other, please contact the local Customer
Service Center of Shineway Technologies, Inc. to obtain additional information and a RMA#
(Return Materials Authorization number). And describe briefly reasons for the return of the
equipment, to allow us offer you more efficient service.
To return MTP-200 in the case of repair, calibration or other maintenance, please note the
following:
➢ Be sure to pack MTP-200 with soft cushion like Polyethylene, so as to protect the shell
of MTP-200.
To Next Page
