MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 52 -
Fig. 11.4 Add Event Dialog Window
3. Press [Enter] to save and back to main window after edit finished, the event will
appear in the event list. If pressed [Cancel], it will quit without save.
There are reflection event and non-reflection event for inserted event.
11.14.3 Modify the Event
User can modify the event in the event sheet manually. For example, when there is an event
analysis result unmatched the observed result, user can modify it through this function.
◆ Event modification won’t result the modification of trace data.
◆ When reanalyze the trace, events will be re-marked, modified event will revert to
original value.
Modify event
1. Press [Modify] after select an event in events options.
To Next Page
Loading...
