MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 9 -
Keep the battery off from fire and intense heat; do not open or short circuit the battery.
2 Basic Operation
2.1 Foreword
This part introduces the basic operation on the MTP-200. Please read this manual carefully
for optimal operation. Should you encounter any problems during operation, you are
welcome to contact the technical staff of our company or representatives.
2.2 Power On/Off
Power on:
Press button and hold 1 seconds till the LED power indicator is on.
Power off:
Press button and hold 3 seconds till the LED power indicator is off.
Power off MTP-200 will completely shut down the platform and modules. When power
on, MTP-200 will restart.
2.3 Enter and Exit Power Saving Mode
When power is on, user can set MTP-200 to power saving mode and return to normal status.
In power saving mode, the LCD backlight will turn off.
Two ways to enter power saving mode:
➢ Press (Power) button once to turn off LCD backlight, LED power indicator
keeps on. (Note: when the button is raised, the backlight close action)
➢ When power is on, MTP-200 will automatically enter power saving mode after its
idle time exceeds pre-set value.
To Next Page
Loading...
