MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 7 -
MTP-200 is a laser instrument. Users should avoid looking directly into the optic
output. And the use of microscope or magnifier should also be avoided, for the use of
such devices can focus a highly intense beam onto the retina, which may result in
permanent eye damage.
Laser Radiation: To avoid serious eye injury, never look directly into the optical
outputs of fiber optic network equipment, test equipment, patch cords, or test
jumpers.
➢ Always avoid looking directly into the optical output port, when MTP-200 is
working.
➢ Always replace protective dust cap on the detector port when MTP-200 is not
being used.
➢ Always avoid looking directly at unconnected end of optic fiber in testing and
make the unconnected end pointing at a non-reflective object if available.
1.8 GUI Icons Instruction
Enter Setup interface, including
Interface style, Language and
System setting etc.
To Next Page
Loading...
