MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 49 -
In navigation window, if click the shadow region (display scope of magnified window),
the operation invalid.
Use direction keys to move trace window
As to the magnified trace, press down the direction keys on the front panel, the trace
window will move correspondingly.
➢ Click “ ” , the trace window move upward
➢ Click“ ”, the trace window move downward
➢ Click “ ”, the trace window move towards the left
➢ Click “ , the trace window move towards the right.
When display the whole trace, the trace window can’t be moved.
11.14 Operation of Event Options
Event sheet lists all the events tested on the trace. Event can be defined as point where
optical transmission occurred change. Events are constituted loss which caused by
transmission, splice, connector or crack. If event was not in the certain threshold, it was
defect event.
To Next Page
Loading...
