MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 48 -
11.11.5 Zoom out Trace Vertically
Click [ ] to Zoom out trace vertically.
11.12 Remember the Zoom Status Automatically
In the process of testing or opening trace, the magnified proportion and position will be
remembered temporary. When test under the same distance once again, the magnified status
of the window remain the same for continuous test.
◆ When user turns off MTP-200, the zoom info won’t be reserved. Turn on
MTP-200 again; trace window will revert to whole trace status.
◆ When user changes wavelength, pulse width and time, as long as the distance is
not changed, auto memory of zoom status will be effective.
◆ When user changes the distance, trace window will revert to whole trace status.
11.13 Move the Magnified Trace Window
After the trace magnified, the trace window will only display part of the trace. There are two
ways to move the trace window:
1. Use stylus or mouse to operate in navigation window.
2. Use 4 direction keys on the front panel to operate.
To move magnified trace window in the navigation window
In the navigation window, can see the position of current window on the whole magnified
trace. Click some place outside the magnified area in the navigation window, trace window
will move to the place correspondingly.
To Next Page
Loading...