MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 80 -
18.3 Focus Control
Control the focus by the focus control knob in the probe.
18.4 Zoom Image
Press [Zoom In] button, the image will magnify double.
In the magnification status, press [Zoom Out] button, the image will recover the original size.
18.5 Capture Image
Inspection the fiber connector, user can capture images and save images in BMP formats. Capture
images can be view in the OCI or be sent to the PC to make a report.
Capture Image:
1. Press [Start] button, and view the image. Then adjust the focus, brightness and contrast until
satisfied with the image.
2. Press [Save] button capture images and enter the save file dialog box.
3. Choose the file name and save location.
4. Press [OK] button to save the image and back to the main interface.
18.6 View the saved Image
1. Click the file manger of main interface program.
2. Open the folder which saves the capture image.
3. Double click the capture image file which you want to view.
4. Press the [File] <OFF> to exit the file manager after you are finished.
To Next Page
Loading...